Jiangsu Sfere Electric Co., Ltd

info@sfere-elec.com

+86-0510-86199063

Rumah> Blog> Power inductor for vehicle information equipment

Power inductor for vehicle information equipment

July 18, 2022

Foreword

In recent years, with the continuous advancement of the electronic process of automobiles, various digital devices for vehicles, including audio and navigation systems, have been increasing. In addition, countries have stipulated the obligation to mount rear view cameras, lane departure warning systems, and automatic emergency braking systems, so that the demand for power inductors used in circuits for converting power supply voltages in these digital devices has increased significantly.

There are many types of power inductors. One of the most representative models is a copper wire wrapped with an insulating coating on the outside of the drum core, with a sleeve core around it, and the coating is a resin made of a mixed magnetic material. The other is a metal composite type in which an air core coil and a metal powder material are integrally formed. The terminal electrode is also classified into a plurality of types such as a metal frame terminal, a solder electrode, and a conductive adhesive.

On the other hand, electronic components for digital devices for vehicles are pursuing the requirements of miniaturization, high temperature resistance, and high reliability. Here we will introduce a wound inductor (up to the LQH**PB series of Figure 1) that can operate at temperatures up to 105 °C.

Power Inductor LQH**PB Series for Automotive Information Equipment

Figure 1: Power Inductor LQH**PB Series for Automotive Information Equipment (from left to right: 32PB, 43PB, 5BPB)

The above LQH series is used around the insulating coated copper wire wound around the drum core, and the magnetic resin used serves to reduce the leakage flux, protect the insulated coated copper wire, and improve the strength of the product. An overview of the structure is shown in Figure 2.

Introduction to the structure of the LQH series

Figure 2: Introduction to the construction of the LQH series

Product characteristics

Improvement of thermal shock resistance (improvement of magnetic resin material)

Automotive electronic components are required to perform a thermal shock test with a minimum service temperature of 1000 cycles. Among them, the in-vehicle information device is subjected to a thermal shock test of 1000 cycles at a temperature of -40 ° C ⇔ + 105 ° C.

The coating material "magnetic resin" of the wound inductor contains epoxy resin, which realizes a large expansion and contraction of the glass transition point as a limit, and a thermal shock test at -40 ° C ⇔ + 105 ° C / 1000 rounds In the case, the magnetic resin also cracks. Further, a ferrite material is used for the drum core portion of the inductor, and the ferrite material and the magnetic resin have a difference in thermal expansion coefficient. If the difference in thermal expansion coefficient is large, the expansion and contraction of the magnetic resin causes stress to be transmitted to the drum core, causing cracks in the drum core.

Kontal AS

Pengarang:

Ms. Spencer

Phone/WhatsApp:

+8617625029642

Produk populer
Anda mungkin juga menyukai
Kategori terkait

Email ke pemasok ini

Subjek:
Email:
Pesan:

Pesan Anda MSS

Rumah

Product

Phone

Tentang kami

Permintaan

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Kirim